ARJAY ENGINEERING EC-Gold Dual Instrukcja Użytkownika Pobierz pdf (Strona 10)

Model: PG-2000

pg2000capum45.DOC Rev: 4.5

- 8 -

The bottom line displays the common alarm status. Based on the current alarm state, “OK”, “Low Alarm”,

“High Alarm”, or “High High Alarm” is displayed. The status reflects the alarm condition including user

settable time delays.

3.3.3 AUXILIARY MODULE STATUS SCREEN

To view this screen, press the DISP key from the Overall Alarm Status Screen.

Aux1:ok

Relays 1-8: 10000000

Aux2:ok

Relays 1-8: 00000001

The above display is for example only. Actual values will vary.

The status of the Auxiliary Relay module(s) is displayed. If only one Aux module is installed, then the

bottom 2 lines are blank.

“ok” means the Aux module is responding on the network.

The next line for each Aux module displays the individual status of each relay 1-8 installed on the Aux

module. From left to right for relays 1 to 8, a 1 indicates the relay is energized and a 0 indicates it is de-

energized.

3.3.4 ZONE ppm STATUS SCREEN

To view this screen, press the DISP key from the Auxiliary Status Screen.

z1 Hi/Av: 25(05)/ 3

z2 Hi/Av: 12(11)/ 5

z3 Hi/Av: 0(20)/ 0

z4 Hi/Av: 0(32)/ 0

The above display is for example only. Actual values will vary.

The ppm status is displayed for each zone. If there are more than 4 zones, then press the DISP key

to view the status of the remaining zones.

Each line starts with the zone number. The first value is the highest ppm recorded for that zone together

with the transmitter network address causing this value. The average value for the entire zone is

displayed at the end of the line. In the example above, zone 1 has a high of 25ppm caused by EC Gold

transmitter # 5. The average for the zone is 3 ppm.

3.3.5 mA MODULE STATUS SCREEN

To view this screen, press the DISP key from the Auxiliary Module Status Screen. This screen is only

displayed if at least one mA module is installed. If more than 4 zones have mA modules then

press the DISP key to view the remaining zone mA status.

z1:MaxmA:ok AvrgmA:ok

z2:MaxmA:ok AvrgmA:ok

z3:MaxmA:ok AvrgmA:ok

z4:MaxmA:ok AvrgmA:ok

The above display is for example only. Actual values will vary. Only mA modules for installed zones are

displayed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Brak uwag

ARJAY ENGINEERING EC-Gold Dual Instrukcja Użytkownika Strona 10